VW Tiguan Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Hi,
I bought a led light bulb. To the front fog light.
I set them to be daytime running lights via VCDS.
Functionality is OK. But the car detects an error.
How to turn off the burnt out light bulb control system?
Or, how do I convince the car that it has an LED bulb?

Error:
Address 09: Cent. Elect. Labels: 1K0-937-08x-09.clb
Control Module Part Number: 5K0 937 086 Q HW: 5K0 937 086 Q
Component and/or Version: BCM PQ35 M 122 0173
Software Coding: 40180A3B88251AC0C08800C93400872C4FD9AA88436D85606488E7000041
Work Shop Code: WSC 01357 011 00200
VCID: 428BFF0FDD8FD89454-8016
2 Faults Found:
01496 - Bulb for Fog-Lamps; Left (L22)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 4
Fault Frequency: 34
Reset counter: 164
Mileage: 131188 km
Time Indication: 0
Date: 2039.14.28
Time: 19:26:35
Freeze Frame:
Term 15 On
Voltage: 11.70 V
ON
ON
ON
OFF
OFF
01500 - Bulb for Fog-Lamps; Right (L23)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 4
Fault Frequency: 25
Reset counter: 164
Mileage: 131188 km
Time Indication: 0
Date: 2039.14.28
Time: 19:26:35
Freeze Frame:
Term 15 On
Voltage: 11.70 V
ON
ON
ON
OFF
OFF

Kitchen appliance Home appliance Telephony Communication Device Font

Car Motor vehicle Gauge Automotive design Speedometer
 

Attachments

·
Registered
2022 Tiguan SE R-line Black Black/Black
Joined
·
72 Posts
LED has a low draw on the system, and the system thinks the bulb is burned out. There are two fixes. One is to buy a LED blub with diodes that make it error-free. You can buy diodes that you can wire in the wires going to be bulbs that will remove the error message.
 

·
Administrator
Volvo XC40, formerly 2015 match 177ps 4mo DSG
Joined
·
2,441 Posts
You clearly have a VCDS or OBDeleven some of these sensing circuits may possibly be Able to be turned off in the control module, but i'm guessing as it's a driving light probably not.
 
1 - 5 of 5 Posts
Top