VW Tiguan Forum banner
241 - 260 of 288 Posts

·
Registered
Joined
·
6 Posts
Hi all,

I've always been bothered by how the power sun shade would slightly close also when folding the mirrors with the fob or using the dimple on the door handle.

I haven't seen this discussed so I figured I'll share what I did to deactivate the power sun shade from closing when folding the mirrors.

1- central Electronics 2
2- long coding
3- bite 2
4- bit 2 uncheck "comfort function closing roof blinds"

This worked for me on a 16 Tiguan R-Line NAR.
 

·
Registered
Joined
·
2 Posts
Hello everyone,
First of all, congratulations for your work, it's really great.
I have a Touran 1.6l 105cv 2010 with 1T0959701AA as door module for the driver and 1T0959701S for the passenger.
I have been trying for a long time to activate the closing mirrors automatically but I can not do it.
My modules are gen3 and I would like to modify the code eeprom but I do not have the security code (04354 does not work).
Is there someone who could help me?
Thank you ;)
 

·
Registered
Joined
·
878 Posts
You must have VAS 5054 with ODI to do it

So choose the module 42.

- Option Write memory cells (something like this)

it will ask code, code is 04 354
Now read address 189, you of might have 0xC3
with In a case I of changed up my bit0 -> 0 to activate light with mirror close and bit4- > to activate the function.
You can also chose it
on 3 positions, 189, 206, 223. All the same process and same value.

my door modul 42

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 5N0 959 701 E HW: 5N0 959 701 E
Component: Tuer SG 009 2101
Coding: 0004350
Shop #: WSC 13231 210 00000
VCID : 377AB3F3465E2386AC-8062

No fault code found.

I have change to D2
BIN 1101 0010

View attachment 24590

View attachment 24592

3.jpg
 

Attachments

·
Registered
Joined
·
65 Posts
Hello my friends

I was trying with vcds to do the folding mirror mod
I live in The Netherlands so i have a lhd
With vcds 12.12 i can find:
(9)-System_Parameter_0-System Parameter Byte8
But if i try to change it to 95 it says something about put heximal or something like that.
i also tried 5f
But it isn't working

Then i tried it with another vcds cable of a friend wich is version 18.x.x but the the parameter:
(9)-System_Parameter_0-System Parameter Byte8
Is not in the list

Hope you have any idea how to make this work

Thanks! ????????
 

·
Registered
Joined
·
9 Posts
Here are the long awaited instructions for coding your folding mirrors off the fob:-

Goto module 42, unlock by going to security tab (VCDS will tell you the code).

Goto adaptation

find

(2)-System_Parameter_14-System Parameter Byte1, change E0 to E5 - open with ignition

or
(2)-System_Parameter_14-System Parameter Byte1,change E0 to E9 - open with door

Save

I am assuming you know how to use VCDS.

Make sure convenience is set in the MFD (see discussion in thread with the guys who didn't get it to work first time)

I politely request that if you want to cut and paste these instructions to use on other forums that you acknowledge both welshkaiboy and n4s as the original authors/copywriters of this coding.
hey, i dont find this "(2)-System_Parameter_14-System Parameter Byte1" in my list

have gen4 software and security access is ok
 

·
Registered
Joined
·
1 Posts
You must have VAS 5054 with ODI to do it

So choose the module 42.

- Option Write memory cells (something like this)

it will ask code, code is 04 354
Now read address 189, you of might have 0xC3
with In a case I of changed up my bit0 -> 0 to activate light with mirror close and bit4- > to activate the function.
You can also chose it
on 3 positions, 189, 206, 223. All the same process and same value.

my door modul 42

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 5N0 959 701 E HW: 5N0 959 701 E
Component: Tuer SG 009 2101
Coding: 0004350
Shop #: WSC 13231 210 00000
VCID : 377AB3F3465E2386AC-8062

No fault code found.

I have change to D2
BIN 1101 0010

attachicon.gif
2.jpg

attachicon.gif
1.jpg

attachicon.gif
3.jpg
Hi, i know that this discussion is quite old but i'm doing this modification right now on my tiguan.
I have done the modification of the addresses with the new value and my mirrors folding with remote control. I want to understand what are the functions of other bits of the code?

we know that in the string 1101 0010 the bits 4 and the bits 2 are used for enable mirrof folding and unfold with ignition or on door opening, but the remaining bits ( XXX1X1XX with the "x") what functions have?

thank you
 

·
Registered
Joined
·
50 Posts
Hi

Does anyone know if the programming of folding mirrors on keyfob is possible with Gen3 modules on a RHD Tiguan?

I've looked over this topic and I just can't seem to find an answer.

If the answer is yes, could someone kindly point me in the right direction for instructions on how to do this?

Many thanks

Darren
 

·
Registered
Joined
·
260 Posts
Helllo Gadget007,

You have gen 3 door controllers:-

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 5N0 959 701 E HW: 5N0 959 701 E

this requires EEPROM access, since you have GEN3 door modules. VCDS only can change GEN4 modules using adaption coding.
 

·
Registered
Joined
·
50 Posts
Thanks kev3

Do you know of any there a step by step process to actually do this (if I manage to get my hands on EEPROM)?

Thanks

Darren
 

·
Registered
Joined
·
50 Posts
Thanks kev3, you're always a font of knowledge!

Have you personally done this mod?

Cheers

Darren
 

·
Registered
Joined
·
50 Posts
According to https://www.drive2.ru/l/9110164/

'You must have VAS 5054'

Question is - will this work with VAS 5054 and above as I'm looking at getting Vag Can Pro 5.5.1 at the link below?

https://www.aliexpress.com/item/4000799845880.html?spm=a2g0o.productlist.0.0.ff16431603VArK&algo_pvid=e99a226d-a880-4377-b33c-fb8ca31a65b6&algo_expid=e99a226d-a880-4377-b33c-fb8ca31a65b6-2&btsid=0ab6f83915880542503395982e6b17&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

According to the product description;

'VAG Pro can completely replaced VAS 5054A ODIS Bluetooth'

Thoughts?

Cheers

Darren
 

·
Registered
Joined
·
260 Posts
Hello Gadget007,

I have not done this mod for folding mirrors on Gen 3 modules.

I have Gen 4 door modules. I did this mod for folding mirror form the key fob using VCDS.

In my time I have programmed may Eproms and EEproms it is risky if you get it wrong the module may turn in to a paper weight. At this level programming there are no safety nets!.

I have used ODIS-e on VW however my licence has expired.

ODIS is the complete diagnostic, reprogramming and service information system for Volkswagen and Audi. It combines the complete ODIS software a VAS-5054 or VAS-6154 interface to provide comprehensive coverage for all VW group vehicles.

I am not sure you'll get full access with this https://www.aliexpre...earchweb201603_

My tool looks a lot different and cost a lot more!

If you're going to have ago you have to be sure what you're doing IT'S VERY EASY TO LOCK THE MODULE AND THERE MAY BE NO RETURN!
 

·
Registered
Joined
·
50 Posts
Thanks kev3

Yes the process isn't for the faint hearted I guess. However that previous link you shared has a Youtube video showing the steps taken.


Hoping to just follow that step by step and hope for the best.

Cheers

Darren
 
241 - 260 of 288 Posts
Top