VW Tiguan Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 · (Edited by Moderator)
Hi all,

I am currently driving a 2009 Tiguan with a leaky sunroof…

Anyway aside from the sunroof issue which I have conceded will never get fixed I now have another issue.

The Bluetooth on the Tiguan keeps losing connection to my iPhone XS.

I looked online and found a YouTube video which said I just need to take out the connection for a few seconds and then reconnect and it will reset and work!???? sure enough this worked for about a month and now it has started to lose connection again, so this morning I disconnected and reconnected and hopefully that will solve the issue for the moment.

My question is if I was to replace the Volkswagen OEM VW UHV Premium Bluetooth 5N0035730D rSAP module with the same module would I need to recode anything or should it just plug and play so to speak?

I have seen them on eBay for a couple of hundred but don't want to purchase if I then have to take to VW for coding.

Cheers
 

Attachments

·
Administrator
Joined
·
5,983 Posts
It depends. If the new module is coded the same as the old, then it will be plug and play. If it's not coded the same, then you will have to recode.
 

·
Administrator
Joined
·
5,983 Posts
Connect a capable scan tool like VCDS to the car and look at the coding
 
1 - 5 of 5 Posts
Top