VW Part.JPG 112.14KB 1 downloadsHi All,
Trying to replace the little flap motor that pivots the blower vent which sits behind the glove box on a 2009 Tig . I can get to the back of the glove box off ok but I can't access the motor because of this plastic junction box that's next to it. All the videos online have 2 or 3 screws holding this junction box in place but mine hasn't got any screws. Didn't want to muscle it too much in case I break it. It does have what appears to be a little strap thingy on it but after un-clipping it, it still didn't budge.
I forgot to take a picture of the junction box that's next to the flap motor before I replaced the glove box. Attached is a screen grab of a similar situation.
Any thoughts would be appreciated. Hoping someone has had the same experience but if not I'll take the whole thing a part next week and take a photo which might help my explanation a bit better.